
Specification
Properties |
Typical value |
Test standard |
Coating asphalt |
Rubber modified self-adhesive asphalt |
- |
Softening point degree C |
105+/-5 |
ASTMD-36 |
Penetration,@25 degree C(dmm) |
50+/-5 |
ASTMD-5 |
Low temperature cold flexibility, degree C |
-15 |
ASTMD-1970 |
Heat resistance @80 degree C |
No flow |
ASTMD-5147 |
Tensile strength(L/T),(N/mm),FILM |
40/45 |
ASTMD-882 |
Elongation at Break(L/T),% |
150/150 |
ASTMD-882 |
Tear resistance (L/T)(N/mm) |
20/20 |
ASTMD-1004 |
Puncture resistance,(N) |
>220 |
ASTME-154 |
Hydro static pressure @ 5bar(50m) |
No leakage |
EN12390(part8) |
Lap joint strength,(N/mm) |
2.0-2.5 |
ASTME-154 |
Water absorption,%wt@23 degree C,24hrs |
0.15 |
ASTMD-570 |
Impermeability to water |
Pass |
EN1928 |
Coverage
Coverage differs depending on the surface condition:
BM SELF AL - Flat Areas: 1.1m2/m2 (Approx.) per layer with min.65mm Overlaps and min100mm end laps.
Average
wastages: 2-3%.
BM PRIME SBD41 - Smooth Surface: 0.3-0.4 Ltr/m2 ( Approx.) will give a Dry film thickness of 100 microns.
Supply
Nominal roll length: 10m, 15m, 20m; Nominal roll width: 1m; Nominal thickness: 1.5mm, 1.8mm and 2.0mm
Price:
![]() |
BITUMAG INDUSTRIES PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |