
Specification
Properties |
Typical Value |
Test Standard |
Coating asphalt |
Rubber modified self-adhesive asphalt |
- |
Top Surfacing |
250gsm polypropylene polyester |
- |
Softening point degree C |
105+/-5 |
ASTMD-36 |
Penetration,25 degree C(dmm) |
50+/-5 |
ASTMD-5 |
Low temperature cold flexibility, degree C |
-10 |
ASTMD-1970 |
Heatresistance80 degree C |
No flow |
ASTMD-5147 |
Tensile strength(L/T),(N/mm) |
860/620 |
ASTMD-882 |
Elongation at Break ( L/T), % (compound) |
300/300 |
ASTMD-882 |
Tear strength(L/T)(N) |
450/400 |
ASTMD-1004 |
Hydro static pressure 5bar(50m) |
No leakage |
BSEN-12390 (partB) |
Lap Joint strength(N/mm) |
2.0-2.5 |
ASTMD-1000 |
Puncture resistance,(N) |
1000 |
ASTME-154 |
Hydro static pressure 5 bar(50m) |
No leakage |
EN12390(part8) |
Coverage
Coverage varies depending on the surface condition:
BM SELF R250 - Flat Areas: 1.1m2/m2 ( Approx.) per layer with min.50mm Overlaps and min.100mm end laps.
Average wastages: 2-3%.
BM PRIME SBD41 - Smooth Surface: 0.3-0.4 Ltr/m2 ( Approx.) will give a dry film thickness of 100 microns
Price:
![]() |
BITUMAG INDUSTRIES PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |