
Specification
Properties |
Typical Value |
Test Standard |
Coating asphalt |
Rubber modified self-adhesive asphalt |
- |
Top Surfacing |
400 gsm Geo textile |
- |
Softening point degree C |
105+/-5 |
ASTMD-36 |
Penetration,@25 degree C(dmm) |
45+/-5 |
ASTMD-5 |
Low temperature cold flexibility, degree C |
-10 |
ASTMD-1970 |
Heat resistance@80 degree C |
No flow |
ASTMD-5147 |
Tensile strength(L/T),(N/5cm) |
>680/520 |
ASTMD-5147 |
Elongation(L/T),(%) |
40/50 |
ASTMD-5147 |
Elongation at Break,%(compound) |
>300 |
ASTMD-412 |
Tear strength(L/T)(N) |
500/420 |
ASTMD-5147 |
Chemical Resistance, |
2.5-11.5 |
ASTMD 543 |
Adhesion Strength,N/mm,Primed surface |
1.8 |
ASTMD-1000 |
Puncture resistance,(N) |
>1500 |
ASTME-154 |
Hydro static pressure @5bar(50m) |
No leakage |
BSEN12390(part8) |
Coverage
Coverage differs depending on the surface condition:
BM SELF R400 - Flat Areas: 1.1m2/m2(Approx.) per layer with min.50mm Overlaps and min.100mm end laps.
Average wastages: 2-3%.
BM PRIME SBD41 - Smooth Surface: 0.3-0.4 Ltr/m 2(Approx.) will give a Dry film thickness of 100 microns.
Supply
Nominal roll length: 8m; Nominal roll width: 1m; Nominal thickness: 3.5 mm & 4.0mm
Price:
![]() |
BITUMAG INDUSTRIES PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |